Horizontal Wallpapering

Wallpaper Installation: Prerequisites and Tips for Horizontal Wallpapering


Wallpapering is a great way other than opting for a painting service to give your home interior a facelift. But it is not as easy as it looks and may require some conditions to be followed. To successfully apply a traditional wallpaper or a stick-on wallpaper, you need to know what you are doing. This article will provide some prerequisites and tips for horizontal wallpapering that can help make the process go smoother.

Prerequisites for Horizontal Wallpapering

Before starting any wallpapering project or painting service, it is important to make sure that the walls are prepped and ready. First, check that the walls are flat and free of any major imperfections such as cracks or holes. If there are any irregularities in the walls, they should be filled in with spackle or joint compound before proceeding with the wallpaper application. If the walls have been previously painted, make sure that all of the paint is removed and that they are clean and dry before applying the wallpaper.

Once you have ensured that your walls are prepped and ready, measure out how much wallpaper you need. Figure out how many rolls of wallpaper you will need by measuring the length of your wall or walls in feet or meters and dividing it by how much coverage each roll provides (which is typically around 32 square feet). Make sure to buy at least one extra roll for cutting mistakes or if you want to add an accent strip! It is always better to be safe than sorry!

Tips for Horizontal Wallpapering

When installing horizontal wallpaper, there are a few tips that can help make the process go smoother. By following these measures, you can expect to apply your wallpaper with ease without any hassle.

Start from the top: When wallpapering horizontally, start from the top of your wall so that you have gravity on your side when smoothing out any bubbles or wrinkles in your paper. Also, this will help ensure that there aren’t any gaps between strips when installing your paper horizontally!

Use primer: Before applying awallpaper adhesive or pasting directly onto your walls with a stick on wallpaper, use a primer first to ensure better adhesion. Primers also help protect against water damage which is especially important if you are using vinyl wallpaper!

Get creative with cuts: When cutting wallpaper strips around corners or curved areas of a room, try using a razor blade instead of scissors as this will give you more control over where you cut!

Work quickly:Wallpaper paste starts drying quickly so it is important to work fast when installing horizontal strips of paper!

Protect floors:Make sure to cover up floors with drop cloths before starting any wallpapering project as the adhesive can be very hard to remove from floors once it dries!

Take breaks: Working on large walls can be tiring so make sure to take breaks now and then so that you don’t get too tired while working!

Installing horizontal wallpaper is a great way to give your home interior a facelift but it does require some preparation beforehand. By considering these prerequisites and tips for horizontal wallpapering outlined here, hopefully, this blog post has helped take some of the stress out of tackling such an undertaking! With careful planning and preparation beforehand along with following these helpful tips during installation, anyone should be able to achieve great results after completing their wallpapering project successfully!

Leave a Reply

Your email address will not be published. Required fields are marked *